Various
- FreetzConf 2011
- Freetz in the Press and on the Web
- Downloads
- Product Name and History
- What is Freetz?
- Where does the name Freetz come from?
- How is Freetz pronounced?
- How did Freetz originate?
- Why a new name at all, when DS-Mod is already so well known?
- Motivation
- Why modify firmware?
- Distribution
- Why are no ready-made modified images offered?
- Where can FREETZ be downloaded?
- Which boxes and which firmware versions are supported by Freetz?
- Development
- When will version xy be released?
- When will feature XY be finished?
- I like Freetz and would like to support further development.
- Preconfiguration (menuconfig)
- How do I recognize which variant of the 7270 I own?
- Which packages should sensibly be included in a Freetz image?
- What does "binary only" mean?
- What does "EXPERIMENTAL" or the "unstable" category mean?
- Do iptables/nat/conntrack work?
- Packet Accelerator (AVM PA)
- What does "not available, no sources by AVM" mean?
- Creating Firmware Images (make/build)
- What do the individual make targets mean, for example dirclean, distclean, config-clean-deps and so on?
- An error occurs while building. What now?
- An error still occurs while building...
- I cannot find the generated Freetz image.
- Where can I find this famous .config file?
- How do I get the .config file onto the PC?
- Flashing the Firmware Image
- How do I install the Freetz image?
- During flashing, the AVM web interface reports that the image does not contain suitable firmware
- Freetz trunk was flashed via AVM firmware update, but after reboot nothing seems to have changed
- Problems after successful flashing
- What is the default password for Freetz?
- After flashing, the AVM web interface is no longer reachable
- After flashing, the box is no longer reachable and/or constantly reboots
- When calling the original AVM web interface from outside, why do I only get a white page despite port forwarding?
- The Freetz web interface does not accept the default username and password combination (admin/freetz)
- Can packages or patches be installed later without rebuilding the FREETZ image?
- After flashing, the Freetz web interface is not reachable anymore
- The dynamic part of the AVM web interface does not behave as expected
- Updating Freetz
- I currently have a lab version installed. Can I simply flash Freetz over it?
- I have old Freetz firmware on the box
- Configuration
- Where do the various configurations end up on the Fritzbox?
- Configuration not available at the current security level!
- How do I disable the password for the Freetz website?
- How do I change the password for the Freetz website?
- How do I change the password for the Freetz website if I have forgotten it and have Telnet/SSH access?
- How do I change the root password?
- Changing the root password through the Rudi shell
- Why can I no longer log into the AVM WebUI after a Freetz restore?
- Problems During Operation
- /var/flash/freetz too big
- No FTP access after Freetz
- Removing Freetz and Other Modifications
- Miscellaneous
- Changing the workgroup from "freetz-linux"
- How do I find the IP of my virtual machine?
- ssh_firmware_update.py